Stainless Steel Cable Railing Systems
Stainless Steel Cable Railing Systems – It was about placing a railing on the corner of a terrace, which had a step less than a meter and was dangerous. The terrace is make of stone and tiles, and the idea was to place a railing that did not have many complications to install, did not come out the face and was aesthetically attractive. The solution was to place a railing of wooden poles and stainless steel cable. The installation is very simple. The biggest difficulty lies in putting the wooden posts, which in our case had to bury in the ground with concrete.
Putting the stainless steel cable railing systems is much easier, although it is advisable to do it between two people so that tensioning them is easier. The cables are fix to the wooden posts with steel sockets, dogs (semi-circular pieces that serve to close the loops of the cables) and the tensionless themselves. First, the screws must be screw directly into the wood. Then the cable is the pass, fold to make the loop and the dog places to close it, tightening the two nuts with a wrench.
12 Photos Gallery of: Stainless Steel Cable Railing Systems
The stainless steel cable railing systems are carried to the other end of the railing, where the tension is completely close. Then another loop is make at the end of the cable with its corresponding dog and it is a hook to the tension. Which you will have to open in order to exert the corresponding tension and cause the cable to be tight.